Installing Granite CountertopsPosted by: Kim Sears | Posted on: December 30, 2020
Granite is not only the toughest countertop material available; it is also the most expensive, with costs beginning at $60 a square foot. While it may be very pricey to instal granite countertops to every kitchen, they remain the premier option in both new and updated homes. The elegance and warmth deliver an aesthetic charm that most countertop products do not find. Learn more by visiting Atlas Kitchen Remodeling – Austin Remodeling Contractor-Countertop Installation.
Granite, with the bulk of the premium derived from production charges, costs more than most countertop products. For the do-it-yourself builder, building granite countertops is not a job that aims to save money on installation costs. It is necessary to leave installation to the experts who have the right experience and equipment. A homeowner might, however, save money on some of the work for preliminary planning and demolition. The range tops, the sink and the old countertops must be thoroughly removed before the phase of installing granite countertops can begin. It is best to leave the majority of the installation process to the experts.
After purchasing the granite countertops, the cabinetry will be correctly measured by a person from the construction company and models for the installation will be made. The expert should be able to tell you where all the seams would be at the moment the models are made. The less seams, the stronger, as straight lines in the natural stone are very visible regardless of how well the joint is fitted. At this stage, they can decide if the sink and range cutouts will need some specialised instruments.
Metal rods and plywood may be attached to the top of the cabinetry prior to the installation to build a solid, flat surface with additional support for the sink and range. This is a vital move, since during normal usage, it stops the granite slab from cracking. A granite countertop installation’s effectiveness requires attention to a slab’s differing thickness.
There might be high and low points on the bottom, since slabs are carefully cut, so levelling is an important phase in the planning process to preserve the stone.
Installers will later carry granite slabs that are just about three centimetres deep and weigh about four-by-eight feet or four-by-twelve feet. In order to minimise tension on the slab during shipping, the slabs will weigh hundreds of pounds and must be carefully carried. If the granite is not properly placed on the cabinetry, it might break during normal usage at a later time.
Through a diamond tip saw to fit the models, the slab of granite can be precisely cut. It would close the joining seams and treat the edge to build a smooth, appealing perimeter. Any required trim inlays, such as metallic materials or separate signs of a solid colour, may be inserted by the installer. The installer would then add a penetrating sealer to a flat reflective finish and polish the product.
As the thickness of the granite will alter some of the process for re-installation of these objects, the installers may remember the placement of electrical outlets, the sink, and the faucets. The installers would also be trained to make improvements to set a cook top and re-secure the brackets of the dishwasher stabiliser without damaging the freshly laid granite countertop.